ServicenavigationHauptnavigationTrailKarteikarten


Forschungsstelle
BFE
Projektnummer
SI/501459
Projekttitel
Photovoltaic roof partially inclined and integrated into the structure

Texte zu diesem Projekt

 DeutschFranzösischItalienischEnglisch
Kurzbeschreibung
-
-
-
Anzeigen
Publikationen / Ergebnisse
Anzeigen
Anzeigen
-
-
Schlussbericht
Anzeigen
Anzeigen
-
Anzeigen

Erfasste Texte


KategorieText
Kurzbeschreibung
(Englisch)
The main goal of the present project is to transform a part of a flat roof into a pinched one. TCR elements, manufactured by Designergy, will compose the tilted roof. The TCR ist the main element of the roof because it is, at the same time, a thermal insulating element, a waterproofing element and, finally, a generator of electrical energy. Indeed, the proposed solution is a photovoltaic system perfectly integrated in the roof; in addition to the aesthetic appeal of system by Designergy, the optimized integration will offer, in potential future projects, relevant reductions of investment cost: TCR system as "standard roof and photovoltaic plant".
Publikationen / Ergebnisse
(Deutsch)
Zugehörige Dokumente
Publikationen / Ergebnisse
(Französisch)
Zugehörige Dokumente
Schlussbericht
(Deutsch)
Dieses Pilotprojekt wurde im Rahmen einer Aufstockung in der Gemeinde Genf, Rue Guye 1-3-5-7, durchgeführt. Es betraf ein Gebäude mit vier Gängen, das sich ursprünglich über vier Stockwerke und ein Attikageschoss erhob. Das Projekt bestand darin, das Attikageschoss in ein Standardgeschoss umzuwandeln und zwei zusätzliche Stockwerke hinzuzufügen. In den bestehenden Wohnungen vom Erdgeschoss bis zum vierten Stock wurden die Außenfenster ausgetauscht und eine mechanische Belüftung eingebaut, die bislang fehlte. Das Flachdach des ursprünglichen Gebäudes war abgesehen von den Aufzugsschächten frei von technischen Installationen. Im Rahmen dieses Projekts schlug die Firma Designergy das TCR-Modulsystem vor, das in das neue Dach integriert werden sollte. Da diese Elemente für Schrägdächer konzipiert sind, wurde eine Giebelakroterie errichtet, um das Erscheinungsbild des Gebäudes nicht zu verändern. Die Pants wurden also in das Gebäude integriert, ohne vom Boden aus sichtbar zu sein. Leider musste der Lieferant der Solaranlage Konkurs anmelden, weshalb das Projekt nicht vollständig umgesetzt und fertiggestellt werden konnte.
Schlussbericht
(Englisch)
This pilot project was carried out within the framework of a building elevation in the commune of Geneva, rue Guye 1-3-5-7. It concerns a building of 4 lanes originally standing on four levels and an attic. The project consisted in transforming the attic into a standard floor and adding two additional floors. The existing apartments from the ground to the 4th floor have had their exterior woodwork replaced and a mechanical ventilation system installed that was previously non-existent. The flat roof of the original building was devoid of any technical installations except for the elevator shafts. Within the framework of this project, the company Designergy proposed the TCR module system and to integrate it into the new roof. As these elements are designed for sloping roofs, an acroterion on the gable was created so as not to alter the appearance of the building. The panels are therefore integrated into the construction without being visible from the ground. Unfortunately, the supplier of the solar system had to file for bankruptcy, which is why the project could not be fully implemented and completed.
Schlussbericht
(Französisch)
Ce projet pilote a été réalisé dans le cadre d’une surélévation sur le la commune de Genève, rue Guye 1-3-5-7. Il concerne un bâtiment de 4 allées s’élevant à l’origine sur quatre niveaux et un attique. Le projet a consisté à transformer l’attique en étage standard et ajouter deux étages complémentaires. Les appartements existant du rez au 4ème étage ont fait l’objet d’un remplacement des menuiseries extérieures et de l’apport d’une ventilation mécanique jusqu’ici inexistante. La toiture plate du bâtiment d’origine était vierge de toute installations techniques hormis les massifs de cages d’ascenseurs. Dans le cadre de ce projet, la société Designergy à proposé le système de module TCR et de l’intégrer dans la nouvelle toiture. Ces éléments étant conçus pour des toitures inclinées, un acrotère sur pignon a été réalisé afin de ne pas modifier l’aspect du bâtiment. Les pants sont donc intégrés à la construction sans être visibles depuis le sol. Malheureusement, le fournisseur du système solaire a dû déposer le bilan, raison pour laquelle le projet n'a pas pu être entièrement mis en oeuvre et achevé.
Zugehörige Dokumente