Sustainable manufacturing and optimized materials and interfaces for lithium metal batteries with digital quality control

Fonte Standard Gras
Identifiant

Unité de recherche

SEFRI

Numéro de projet

22.00246

Titre du projet

Sustainable manufacturing and optimized materials and interfaces for lithium metal batteries with digital quality control

Textes relatifs à ce projet

	Allemand	Français	Italien	Anglais
Résumé des résultats (Abstract)	-	-	-

Textes saisis

Catégorie	Texte
Résumé des résultats (Abstract) (Anglais)	The SOLiD project will create a sustainable and cost-efficient pilot scale manufacturing process for a high energy density, safe and easily recyclable solid-state Li-metal battery. We will use roll-to-roll (R2R) dry extrusion coating for the blend of cathode active material, solid polymer electrolyte, and conducting additives. R2R slot die coated primers on the cathode current collector will enhance adhesion, performance and corrosion resistance of the cell. The polymer electrolyte layer will be R2R coated, using an optimal design for the slot die head. For the Li metal anode, we will utilize cost-efficient R2R pulsed laser deposition, which enables minimizing the Li thickness down to 5 µm. The Li metal production will be combined with an inline process for interfacial engineering to ensure compatibility with the other layers and stability. The process development will be supported by digitalization methods to go towards zero-defect and costefficient manufacturing. The proposed methods enable sustainable manufacturing of Gen. 4b solid state batteries with minimised amount of critical raw materials (Co and Li), and with superior performance and safety: The protective layers enable the use of NMC811, which reduces the amount of Co into minimum without compromising the lifetime, and PLD process helps to minimize the Li thickness. Dry coating eliminates the use of toxic solvents and energy-consuming drying steps, and the digital quality control will reduce the amount of waste. The thickness of each layer will be minimized to reach energy density above 900 Wh/l. Cost will be reduced by cost-effective production methods and by maximizing the yield. Safety and long cycle life are guaranteed by the solid electrolyte and the protective interlayers. Supported by the life-cycle thinking and stakeholder engagement, the SOLiD project will enable the design for a sustainable solid state battery factory of the future.

Catégorie

Texte

Résumé des résultats (Abstract)
(Anglais)

The SOLiD project will create a sustainable and cost-efficient pilot scale manufacturing process for a high energy density, safe and easily recyclable solid-state Li-metal battery. We will use roll-to-roll (R2R) dry extrusion coating for the blend of cathode active material, solid polymer electrolyte, and conducting additives. R2R slot die coated primers on the cathode current collector will enhance adhesion, performance and corrosion resistance of the cell. The polymer electrolyte layer will be R2R coated, using an optimal design for the slot die head. For the Li metal anode, we will utilize cost-efficient R2R pulsed laser deposition, which enables minimizing the Li thickness down to 5 µm. The Li metal production will be combined with an inline process for interfacial engineering to ensure compatibility with the other layers and stability. The process development will be supported by digitalization methods to go towards zero-defect and costefficient manufacturing. The proposed methods enable sustainable manufacturing of Gen. 4b solid state batteries with minimised amount of critical raw materials (Co and Li), and with superior performance and safety: The protective layers enable the use of NMC811, which reduces the amount of Co into minimum without compromising the lifetime, and PLD process helps to minimize the Li thickness. Dry coating eliminates the use of toxic solvents and energy-consuming drying steps, and the digital quality control will reduce the amount of waste. The thickness of each layer will be minimized to reach energy density above 900 Wh/l. Cost will be reduced by cost-effective production methods and by maximizing the yield. Safety and long cycle life are guaranteed by the solid electrolyte and the protective interlayers. Supported by the life-cycle thinking and stakeholder engagement, the SOLiD project will enable the design for a sustainable solid state battery factory of the future.