HIgh throughPut LasER processing of DIamond and Silicon

Schrift Standard Fett
Login

Forschungsstelle

SBFI

Projektnummer

15.0301

Projekttitel

HIgh throughPut LasER processing of DIamond and Silicon

Texte zu diesem Projekt

	Deutsch	Französisch	Italienisch	Englisch
Abstract	-	-	-

Erfasste Texte

Kategorie	Text
Abstract (Englisch)	Driven by the end-users requirements and needs, the main objective of the HIPERDIAS project is to demonstrate high\nthroughput laser-based manufacturing using high-power, high-repetition rate sub-1ps laser. Although the laser system to be\ndeveloped within HIPERDIAS can address other material processing applications, the focus here will be 3D structuring of\nsilicon at high-speed, precision processing of diamond material and fine cutting of metal for the watch and the medical\nindustry. Chirped Pulse Amplification (CPA) approach based on highly efficient compressors gratings will be implemented in\norder to minimize the overall losses of the laser system. The final targets of the project are to demonstrate:\n- a 10-times increase of ablation rate and productivity of large area 3D-structuring of silicon\n- a 10 times increase of speed in fine cutting metals\n- an increase of process speed (6-10 times) at a low processing tools cost of diamond machining\nTherefore, the laser parameters, as well as the beam shaping, beam guiding (based on Kagomé fibers) and machine\nsystems will be developed and optimized to fulfill the above manufacturing targets. The laser architecture will be based on\nfully passive amplifier stages combining hybrid (fiber-bulk) amplifier and thin-disk multipass amplifiers to achieve sub-500fs\nat an average output power of 500W and sub-1ps at an average output of 1kW, at a repetition rate of 1-2 MHz. Furthermore,\nsecond harmonic generation (SHG, 515 nm) and third harmonic generation (THG, 343 nm) will be implemented to allow\nprocessing investigation at these wavelengths. At 515 nm (respectively 343 nm) an average power of >=250W (respectively\n>=100W) shall be demonstrated.

Kategorie

Text

Abstract
(Englisch)

Driven by the end-users requirements and needs, the main objective of the HIPERDIAS project is to demonstrate high\nthroughput laser-based manufacturing using high-power, high-repetition rate sub-1ps laser. Although the laser system to be\ndeveloped within HIPERDIAS can address other material processing applications, the focus here will be 3D structuring of\nsilicon at high-speed, precision processing of diamond material and fine cutting of metal for the watch and the medical\nindustry. Chirped Pulse Amplification (CPA) approach based on highly efficient compressors gratings will be implemented in\norder to minimize the overall losses of the laser system. The final targets of the project are to demonstrate:\n- a 10-times increase of ablation rate and productivity of large area 3D-structuring of silicon\n- a 10 times increase of speed in fine cutting metals\n- an increase of process speed (6-10 times) at a low processing tools cost of diamond machining\nTherefore, the laser parameters, as well as the beam shaping, beam guiding (based on Kagomé fibers) and machine\nsystems will be developed and optimized to fulfill the above manufacturing targets. The laser architecture will be based on\nfully passive amplifier stages combining hybrid (fiber-bulk) amplifier and thin-disk multipass amplifiers to achieve sub-500fs\nat an average output power of 500W and sub-1ps at an average output of 1kW, at a repetition rate of 1-2 MHz. Furthermore,\nsecond harmonic generation (SHG, 515 nm) and third harmonic generation (THG, 343 nm) will be implemented to allow\nprocessing investigation at these wavelengths. At 515 nm (respectively 343 nm) an average power of >=250W (respectively\n>=100W) shall be demonstrated.