Titel
Accueil
Navigation principale
Contenu
Recherche
Aide
Fonte
Standard
Gras
Identifiant
Interrompre la session?
Une session sous le nom de
InternetUser
est en cours.
Souhaitez-vous vraiment vous déconnecter?
Interrompre la session?
Une session sous le nom de
InternetUser
est en cours.
Souhaitez-vous vraiment vous déconnecter?
Accueil
Plus de données
Partenaires
Aide
Mentions légales
D
F
E
La recherche est en cours.
Interrompre la recherche
Recherche de projets
Projet actuel
Projets récents
Graphiques
Identifiant
Titel
Titel
Unité de recherche
SEFRI
Numéro de projet
15.0035
Titre du projet
Large cost-effective OLED microdisplays and their applications
Données de base
Textes
Participants
Titel
Textes relatifs à ce projet
Allemand
Français
Italien
Anglais
Résumé des résultats (Abstract)
-
-
-
Textes saisis
Catégorie
Texte
Résumé des résultats (Abstract)
(Anglais)
The LOMID project will define pathways to the manufacture of flexible OLED microdisplays with an exceptionally large area (16 mm x 20 mm, screen diagonal of 25.4 mm) at acceptably high yields (>65%). \n\nThis will be achieved by developing a robust silicon-based chip design allowing high pixel counts (1024x1280 (SXGA)) and high spatial resolution(pixel sizes of 10 µm x 10 µm corresponding to 2000 ppi). These display innovations will be coupled to a highly reliable manufacturing of the backplane. Cheap processes (e.g. based on 0.35 µm lithography) will be developed and special attention will be given to the interface between the top metal electrode of the CMOS backplane and the subsequent OLED layers. All these developments will be done on a 200 mm wafer scale. Along with this, a new testing procedure for quality control of the CMOS wafer (prior to OLED deposition) will be developed and promoted for standardisation. \n\nThe flexibility of the large area microdisplays will be achieved by wafer thinning to enable a bending radius of 45 mm. Along with the new functionality, the durability of the devices has to be guaranteed despite bending to be comparable to rigid devices. The project will address this by improving the OLED efficiency (e.g. operating lifetime > 15,000 hours) and by modifying the device encapsulation to both fulfil the necessary barrier requirements (WVTR < 10^-6 g/d m2) and to give sufficient mechanical protection.\nThe demand for and timeliness of these flexible, large area microdisplays is shown by the strong interest of industrial integrators to demonstrate the benefits of the innovative OLED microdisplays. Within the project, industrial integrators will validate the project’s microdisplays in smart glasses for virtual reality and to aid those with impaired vision.
SEFRI
- Einsteinstrasse 2 - 3003 Berne -
Mentions légales