ServicenavigationHauptnavigationTrailKarteikarten

Forschungsstelle
INNOSUISSE
Projektnummer
18511.1 PFNM-NM
Projekttitel
Bridging Si3N4 nanopipettes and glass micropipettes: hollow SU-8 cantilevers for 2D and 3D cell printing
Projekttitel Englisch
Bridging Si3N4 nanopipettes and glass micropipettes: hollow SU-8 cantilevers for 2D and 3D cell printing

Texte zu diesem Projekt
 DeutschFranzösischItalienischEnglisch
Kurzbeschreibung
Anzeigen
-
-
Anzeigen
Abstract
Anzeigen
-
-
Anzeigen

Erfasste Texte


KategorieText
Kurzbeschreibung
(Deutsch)
Bridging Si3N4 nanopipettes and glass micropipettes: hollow SU-8 cantilevers for 2D and 3D cell printing
Kurzbeschreibung
(Englisch)
Bridging Si3N4 nanopipettes and glass micropipettes: hollow SU-8 cantilevers for 2D and 3D cell printing
Abstract
(Deutsch)
We will define the process for the microfabrication of a novel FluidFM product: SU-8 cantilevers with an|embedded 20-ìm thick channel and a 20-ìm aperture. The novel cantilever product will allow for mammalian|cells to flow through it. We will establish the application note for single-cell dispensing and 3D cell printing.
Abstract
(Englisch)
We will define the process for the microfabrication of a novel FluidFM product: SU-8 cantilevers with an|embedded 20-ìm thick channel and a 20-ìm aperture. The novel cantilever product will allow for mammalian|cells to flow through it. We will establish the application note for single-cell dispensing and 3D cell printing.