ServicenavigationHauptnavigationTrailKarteikarten


Forschungsstelle
COST
Projektnummer
C04.0217
Projekttitel
Timber and wood bonding process: Pull-out strength of steel rods with metric thread bonded in glulam
Projekttitel Englisch
Timber and wood bonding process: Pull-out strength of steel rods with metric thread bonded in glulam

Texte zu diesem Projekt

 DeutschFranzösischItalienischEnglisch
Schlüsselwörter
-
-
-
Anzeigen
Forschungsprogramme
-
-
-
Anzeigen
Kurzbeschreibung
-
-
-
Anzeigen
Partner und Internationale Organisationen
-
-
-
Anzeigen
Abstract
-
-
-
Anzeigen
Datenbankreferenzen
-
-
-
Anzeigen

Erfasste Texte


KategorieText
Schlüsselwörter
(Englisch)
bonding; gluing; reinforcement; timber; epoxy; glulam; beam; steel rod; connection ; joint
Forschungsprogramme
(Englisch)
COST-Action E34 - Bonding of timber
Kurzbeschreibung
(Englisch)
Several design approaches and code models to calculate the pull-out strength of steel rods bonded in glulam structural elements have been published. By comparing these models and approaches, some discrepancies and partly even contradictions between the models, especially regarding the treatment of isolated parameters, can be found. On this background, a test program shall be realised, to study the influence of a selection of these parameters, known or supposed to be determinant on the pull-out strength of axially loaded steel rods with a metric screw-thread, bonded with an epoxy-type adhesive in glulam made of spruce. The evaluation will be focused to determine the influence of timber density, rod-to-grain angle (0° or 90°), length and diameter of the rod on the pull-out strength of glued-in rods.
Partner und Internationale Organisationen
(Englisch)
AT, BE, CY, DK, FI, FR, DE, EL, IT, NL, NO, PL, PT, SK, SI, ES, SE, CH, UK
Abstract
(Englisch)
Several design approaches and code models to calculate the pull-out strength of steel rods bonded in glulam structural elements have been published. By comparing these models and approaches, some discrepancies and partly even contradictions between the models, especially regarding the treatment of isolated parameters, can be found. On this background, a test program shall be realised, to study the influence of a selection of these parameters, known or supposed to be determinant on the pull-out strength of axially loaded steel rods with a metric screw-thread, bonded with an epoxy-type adhesive in glulam made of spruce. The evaluation will be focused to determine the influence of timber density, rod-to-grain angle (0° or 90°), length and diameter of the rod on the pull-out strength of glued-in rods.
Datenbankreferenzen
(Englisch)
Swiss Database: COST-DB of the State Secretariat for Education and Research Hallwylstrasse 4 CH-3003 Berne, Switzerland Tel. +41 31 322 74 82 Swiss Project-Number: C04.0217