En-tête de navigationNavigation principaleSuiviFiche


Unité de recherche
PCRD EU
Numéro de projet
02.0082-1
Titre du projet
AMTT: Aerospace materials technology testhouse
Titre du projet anglais
AMTT: Aerospace materials technology testhouse

Textes relatifs à ce projet

 AllemandFrançaisItalienAnglais
Mots-clé
-
-
-
Anzeigen
Autre Numéro de projet
-
-
-
Anzeigen
Programme de recherche
-
-
-
Anzeigen
Description succincte
-
-
-
Anzeigen
Résumé des résultats (Abstract)
-
-
-
Anzeigen
Références bases de données
-
-
-
Anzeigen

Textes saisis


CatégorieTexte
Mots-clé
(Anglais)
Multilayer insulation (mli)
Autre Numéro de projet
(Anglais)
EU project number: HPRI-CT-1999-00024
Programme de recherche
(Anglais)
EU-programme: 5. Frame Research Programme - 4.2 Agriculture and agroindustry
Description succincte
(Anglais)
See abstract
Résumé des résultats (Abstract)
(Anglais)
Multilayer insulation (MLI) is the material of choice to protect spacecraft from radiative losses or extreme heat.The theory behind MLI is based on modelling a series of infinite plates and determining an equivalent (linearized) conductivity, so called equivalent emissivity. The problem is that this predicted emissivity correlates well with flat samples of the materials but not at all with the observed values when applied to real surfaces such as an entire satellite or any of its substructures. The errors range between a decade and a factor 100. Furthermore if this emissivity is plotted against temperature the real surface shows a drop with increasing temperature, whereas the test coupons show an increase. This is extreme enough that MLI design has become more an art based on prior performance than a science which would allow weight and performance optimisation. Objective of the project is to generate a correlation for multilayer insulation that would allow prediction of performance in coating real surfaces and hence an optimisation.
The program was based on using four different types of MLI in differing configurations and required the measurement of emissivity in a vacuum chamber at space environment temperatures: -150°C to 200°C. Furthermore a correlation with space structures, in this case a Louver breadboard, was to be measured.
Références bases de données
(Anglais)
Swiss Database: Euro-DB of the
State Secretariat for Education and Research
Hallwylstrasse 4
CH-3003 Berne, Switzerland
Tel. +41 31 322 74 82
Swiss Project-Number: 02.0082-1